Technical Material Storage Stability

A full range of standard tests necessary to determine both the chemical and physical nature of technical materials are available. These include OECD, US EPA OPPTS and EEC methods.

We offer a range of storage conditions, tailored to meet your needs.

The technical material tests we can offer include:
(This list is not exhaustive)

  • Acidity/Alkalinity CIPAC MT191
  • Appearance of Sample and Packaging (In House Method)
  • Auto-Ignition Temperature EC A16
  • Auto Flammability EC A15
  • Boiling Point OECD 103
  • Corrosivity UN TEST C.1
  • Density EC A3
  • Dissociation constant OECD112
  • Explosivity (by Expert Statement or DSC Screening)
  • Flammability EC A10
  • Flammability on Contact with Water EC A12
  • Flash Point (Pensky Martens) ASTM D 7094-04 and EEC A9
  • Flash Point (Abel Method) CIPAC MT12.1
  • Flash Point (Open Cup)
  • Hydrolysis OECD111
  • Laboratory Immersion Corrosion Testing of Metals ASTM G31-72
  • Loss on drying CIPAC MT17
  • Melting Point OECD 102
  • Moisture content (Karl Fischer) CIPAC MT30
  • Nitrosamines by Thermal Energy Analyzer (TEA)
  • Oxidizing Properties in Solids UN Tests O1 (EEC A17)
  • Oxidizing Properties in Liquids UN Tests O2
  • Partition coefficient in N-Octanol/Water (EEC A8, OECD107, OECD117 and OECD123)
  • pH CIPAC 75.3
  • Photolysis OECD316
  • Refractive Index ASTM1218
  • Relative Density EC A3 and OCED109
  • Self-Heating Solids UN Test N.4
  • Self Reactive Substances and Mixtures (Thermal Stability) OECD113
  • Solubility in organic solvents CIPAC MT181 and OECD105
  • Solubility in water CIPAC MT157 and OECD105
  • Spectral identification using Mass Spectrometry, 3D UV Spectra, FTIR and NMR
  • Stability to Metals and Metal Ions OPPTS 830-6313
  • Substances and Mixtures in Contact with Water Emit Flammable Gases UN Test N.5
  • Surface Tension EC A5 or OECD 115
  • Sustained Combustibility UN Test L.2
  • Tap Density CIPAC MT33 and MT169
  • Triethanolamine Insolubles (In House Method)
  • Vapour Pressure OECD 104 and EEC A.4 (Gas Saturation and Isoteniscope)
  • Vapour Pressure Reid Method ASTM D323
  • Viscosity CIPAC MT192 or OECD 114
  • UV Vis Absorption Spectra OECD 101
  • UN Bowes Cameron Cage Test
If a test is required and is not listed above, please contact us.

STOP PRESS

In accordance with the latest Technical Guidance (SANTE/11956/2016 rev 9) DNAL can offer all of the required analytical tests for the method development, determination and validation of pesticide residues in honey to set the MRLs.

Contact us for further information about our services:

+44 (0)1322 228 783 or email us